Dialight D1RW-LPK08 Lightning Protection Kit User Manual
Page 3
Document No.
9100-127-1560-99 Rev B
Release Date: 10/10/2011
_____________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 3 of 15
Section 1: Overview
The Lightning Protection Kit (D1RW-LPK08) has been designed to further protect
the Flash Head and Power Supply from transients and surges caused by direct
and indirect lightning strikes. The Lightning Protection Kit consists of a
lightning/surge protection board, means for properly grounding the cables and
Lightning Protection Kit. The Lightning Protection Kit will be installed in series
with the flash head cable, between the power supply and flash head. It must be
installed within 2 feet of the power supply for maximum protection against
transients.
WARNING: All ground bonds must be made properly and securely for the
Lightning Protection Kit to be effective.
This manual will give step by step instructions on the proper installation and
testing of the Lightning Protection Kit.
Section 2: System Block Diagram