Dialight D1RW-LPK08 Lightning Protection Kit - Manual (Page 9)

Document No.
9100-127-1560-99 Rev B
Release Date: 10/10/2011
_____________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 9 of 15
Step 12. Repeat steps 4 – 9, this time using the cable on the Power supply side.
Step 13. Insert the wires and cable through the cable gland nut as shown below.
Do not tighten the Gland nuts yet.
Step 14. Connect the Wires to J1 “From Power Supply” of the Lightning
Protection Board following the label “From Power Supply” for the colors as shown
below. Using a small screwdriver to press in the tabs of each terminal will help
ease the process of connecting the wires.