Dialight D1RW-LPK08 Lightning Protection Kit - Manual (Page 7)

Document No.
9100-127-1560-99 Rev B
Release Date: 10/10/2011
_____________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 7 of 15
Step 7. If yellow fiber material is present, expose the yellow fiber material and
remove by cutting. Be careful not to damage the wires or shielding foil.
Step 8. Measure roughly 1½ - 2 inches of the foil from the protective wire cover
and cut the foil as shown below. Ensure that the foil shield is wrapped around the
cable and the silver foil side is facing out.
Step 9. Strip each ends of each the wires, as shown below.