Dialight D1RW-LPK08 Lightning Protection Kit User Manual
Page 6
Advertising
Document No.
9100-127-1560-99 Rev B
Release Date: 10/10/2011
_____________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 6 of 15
Step 4. Measure roughly 8 inches of the cable. Start with the tower side.
Step 5. Using a knife/ razor, carefully cut the protective cover of the wire,
ensuring not to damage the wires and insulating foil inside.
DO NOT CUT OFF ANY WIRE, BARE WIRE and/or FOIL.
Step 6. Separate the Drain Wire (Bare wire) from the rest of the bundle. And
carefully unravel the shielding foil from the bundle of wires.
Advertising