Dialight D1RW-LPK08 Lightning Protection Kit - Manual (Page 8)

Document No.
9100-127-1560-99 Rev B
Release Date: 10/10/2011
_____________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 8 of 15
Step 10. Insert the wires and cable through the cable gland nut as shown below.
Do not tighten the Gland nuts yet.
Step 11. Connect the Wires to J2 “To Tower” of the Lightning Protection Board
following the label “To Flash Head” for the colors as shown below. Using a small
screwdriver to press in the tabs of each terminal will help ease the process of
connecting the wires.