MoTeC ADL EDL - Manual (Page 44)

42 Dash Manager Software
Tests
A number of tests are provided to check the operation of the ADL, such as the
Display Test.
To run one of the tests select the appropriate test from the Online menu.
Sensor Zeroing
Some sensors require regular zeroing, for example Steering Angle,
Suspension Position, Ride Heights, G Force Sensors & Throttle Position.
Dash Manager provides a screen to allow easy zeroing of all these sensors.
To zero the sensors select Online | Zero Sensors form the main menu.
Details Editor
The Details Editor allows details about the Event, Venue, & Vehicle to be
entered.
This data is attached to the logged data file for latter reference.
Some of this data is also attached to the configuration to determine the
operation of some functions, for example, the Track Length is used to
determine Lap Speed, if used.
To change the details select File | Edit Details from the main menu.