MoTeC ADL EDL - Manual (Page 8)

6 Overview
Race
The race display is normally used to display minimal information, eg RPM,
Lap Time, Fuel Remaining or Laps Remaining.
The bottom display may be used to display additional information as needed.
Display Formatting
Units
The display units can be changed to suit the driver, for example the driver
may prefer to see the engine temperature in Fahrenheit rather Celsius. This is
independent of the units used for other purposes.
Decimal Places
The number of decimal places can be reduced for display purposes, for
example the engine temperature is measured to 0.1
°C but is better displayed
with no decimal places. This is normally done automatically.
Alarms
When an alarm is activated a message is shown on the bottom line of the
display, a warning light can also be activated which is recommended to draw
the drivers attention to the display.
The message displayed can be defined and can also include the current
sensor reading or the sensor reading when the alarm was triggered.