MoTeC ADL EDL - Manual (Page 53)

MoTeC Appendices 51
Appendix C: Dash Manager Command Line
Usage:
dash.exe -c[connection] -d -x -l -e -t -s [config file name]
[config file name]
(Optional)
Fully qualified path to the configuration file.
(eg "c:\motec\dash\config\bathurst.d30")
Note: the path must included the file extension (eg .d30)
Options :
Each of the following options can be given as "/[character]" or "-[character]".
They are shown here as "-[character]".
-c[Connection Name]
(Optional)
Select a preconfigured connection by name as configured in the dash
connections dialog.
(eg -c"Primary CAN Connection").
Note: There must not be a space between the c and the connection name.
-d
(Optional)
Causes the debug console to be displayed.
Only available for debug builds.
-x
(Optional)
Causes the app to terminate when one the following tasks has been
performed.
Tasks :
One or more of the following may be specified.
-l
(Optional)
Perform a “Get Logged Data” operation.