ALESIS 03D - Manual (Page 203)

Editing Events Off-line
193
03D—Owner’s Manual
Editing Events Off-line
Events in the current automix can be edited off-line using the Event Edit page (this page
cannot be accessed during automix playback or recording).
1. Use the [AUTOMIX] button to locate the Event Edit page.
Events are listed chronologically in the event list, which shows the time, event type, and
the channel that it applies to.
2. Use the cursor buttons to select an EVENT EDIT CHANNEL switch, and
then press the [ENTER] button to activate that channel.
If you are using a mouse, simply click the EVENT EDIT CHANNEL switch.
Events for the selected channel appear in the event list. The EVENT EDIT CHANNEL
switches can be used to filter events from the event list. Use the ALL ON and ALL OFF
switches to turn on or off all EVENT EDIT CHANNEL switches together.
3. Use the cursor buttons to select a parameter type switch, and then press
the [ENTER] button to activate it.
If you are using a mouse, simply click a parameter type switch.
Events containing the selected parameter type appear in the event list. The
parameter type switches can be used to filter certain types of events from
the list.
Cross fade events occur when the Return function is used on-line or the Trim function
on the Extract page is used for fader editing. Cross fades provide smooth fade ins and
fade outs.
4. Use the cursor buttons to select the scroll arrows next to the event list,
and the PARAMETER wheel to scroll through the events.
If you are using a mouse, position the mouse cursor over the scroll arrows, press and
hold the left mouse button, and then drag the mouse.
Switch Parameters
SCENE
Mix scene recalls, including transmitted MIDI Program Changes,
scene recall safe
LIB. Channel, EQ, dynamics, and effects library recalls
CH ON Channel [ON] buttons
PAN Pan, balance, surround pan
EQ EQ
FADER Normal CH faders, cross fades, CH AUX sends, & CH Effect sends