ALESIS 03D - Manual (Page 254)

244
Chapter 19—MIDI
03D—Owner’s Manual
Assigning Devices to MIDI Remote Pages
Four MIDI Remote pages are available and each can be assigned to one device.
1. Use the [MIDI REMOTE] button to locate the Setup page shown below.
2. Use the cursor buttons to select a page’s rotary control, and then use the
PARAMETER wheel to select a device.
If you are using a mouse, position the mouse cursor over a rotary control, press and
hold the left mouse button, and then drag the mouse.
3. Use the cursor buttons to select the CH/PORT parameters, and then use
the [ENTER] button and PARAMETER wheel to set them.
If you are using a mouse, simply click the CH/PORT switches. Position the mouse cur-
sor over the CH parameters, press and hold the left mouse button, and then drag the
mouse.
The CH/PORT parameters determine which ports the 03D uses to transmit and receive
MIDI Remote messages for the four MIDI Remote pages: MIDI OUT or TO HOST.
The MIDI Channel can be set for each MIDI Remote page.
The CH/PORT settings can also be made on the MIDI/HOST page of the Utility func-
tion. See MIDI/HOST Setup on page 233 for more information.