ALESIS 03D - Manual (Page 245)

MIDI Setup
235
03D—Owner’s Manual
selecting the SETUP switch and then pressing the [ENTER] button. If you are using a
mouse, simply click the SETUP switch. The following dialog box appears.
These setting are really intended for those who write their own computer programs to
control the 03D. You should not change them unless you know what you are doing. If
you are using a standard MIDI sequencer program, use the following settings.
The x2,
÷
2, and
÷
4 settings apply only to the 31.25K BAUD RATE.
If the 38.4K or 19.2K BAUD RATE is used, Tx CLOCK is fixed at OFF.
MIDI Setup
The MIDI Setup page is used to configure basic 03D MIDI parameters, such as MIDI
transmit (Tx) and receive (Rx) Channels, OMNI on/off, echo on/off, and so on.
1. Use the [MIDI] button to locate the MIDI Setup page shown below.
2. Use the cursor buttons to select the parameter switches and the [ENTER]
button to set them. Use the PARAMETER wheel to set the rotary controls.
If you are using a mouse, simply click the parameter switches and drag the rotary con-
trols.
PROGRAM CHANGE —Program Change messages are used to recall mix scenes. See
Program Change Assign on page 239 for more information. The four switches in this
group are as follows. Tx determines whether or not the 03D transmits Program Change
messages. Rx determines whether or not the 03D receives Program Change messages.
OMNI determines whether or not the 03D receives Program Change messages on all 16
MIDI Channels. When OMNI is on, Program Change messages are received regardless
of the MIDI CHANNEL Rx parameter settings. ECHO determines whether or not Pro-
gram Change messages are echoed to the MIDI OUT.
CONTROL CHANGE —Control Change messages are used to control 03D parameters
in real time. See Control Change Assign on page 240 for more information. The four
switches in this group are as follows. Tx determines whether or not the 03D transmits
Computer Type BAUD RATE Tx CLOCK
Macintosh 31.25K
(Some Windows PC software
may need to use 38.4K) x32
Windows PC OFF