Cleaning instructions, Mber in, Figure 3: removing ir cut filter – ALLIED Vision Technologies Oscar F-810 User Manual
Page 29: Protection glass using special tool (e9020001), Figure 3: removing ir cut filter/protec, Tion glass using special tool (e9020001)
AVT camera cleaning instructions
FireWire Hardware Installation Guide V8.0.0
29
3.
If the impurity is neither on the lens nor the IR cut filter/protection glass,
it is probably on the sensor.
Cleaning Instructions
Perform all cleaning operations (lenses, filter/protection glass, sensor in a
dust-free clean-room. The optical components are very fragile so it is import-
ant to avoid touching them with your fingers or any hard material.
1.
Unplug the camera from any power supply before cleaning.
2.
Apply a small amount of optics cleaner (60% ethyl alcohol, 40% ether) to
clean, new lens cleaning tissue.
Acceptable material includes medical-grade sterile optical cotton, or lens
tissue that is chemically pure and free from silicones and other additives.
– Do not use cosmetic cotton.
– Do not use consumer eyeglass cleaning cloths pre-treated with silicon.
Note
•
Taking out the filter requires special care. The customer is
fully responsible for all actions of changing/removing
filter by himself.
•
Ask your dealer to help you if you are not confident with
the procedure.
Figure 3: Removing IR cut filter/protection glass using special tool (E9020001)