Guppy (board level) io block diagram, Guppy data, Guppy power – ALLIED Vision Technologies Oscar F-810 User Manual
Page 75
Advertising
Camera interfaces
FireWire Hardware Installation Guide V8.0.0
75
Guppy (board level) IO block diagram
The GPIOs of the board level Guppy have the same electrical characteristics as
the GPIOs of the standard (housing) Guppy.
Guppy data
Currently RS232 data interface is not implemented.
Guppy power
In accordance to IEEE 1394a specification the power supply (+8 V ... +36 V)
should deliver a current of at least 1.5 A.
Figure 39: Guppy (board level) input block diagram
GPInOut1
external internal
GND
GND
GND
GPInOutx
GND
GND
GND
Advertising
This manual is related to the following products: