Installing ieee 1394 adapter, Connecting camera to pc or laptop, Es in chapter – ALLIED Vision Technologies Oscar F-810 User Manual
Page 35: Necting camera to pc or laptop
AVT cameras: installing hardware
FireWire Hardware Installation Guide V8.0.0
35
Installing IEEE 1394 adapter
1.
PC: Install the IEEE 1394 adapter according to the instructions you got
from your adapter manufacturer.
Laptop: Insert the IEEE 1394 PC Card into your laptop. Connect external
power supply to the adapter to power the camera or power the camera via
Hirose connector.
2.
Windows XP/ Windows Vista / Windows 7 will detect the hardware auto-
matically and installs a Windows 1394 driver.
Connecting camera to PC or laptop
1.
Shut down your PC or laptop and turn computer power off.
www
For more information see AVT Software Selector Guide:
Caution
•
Do not touch the shield of the camera cable connected
to a computer and the ground terminal of the lines at the
same time.
•
If you are charged: before touching the shield of the cam-
era cable, make sure to discharge first (by touching the
ground terminal of the lines).
•
Use only DC power supplies with insulated cases. These
are identified by having only two power connectors.
•
If you feel uncomfortable with the previous advice or if
you have no knowledge about the connectivity of an
installation, we strongly recommend powering down
all systems before connecting or disconnecting a cam-
era.