Stingray data, Stingray power, Stingray data stingray power – ALLIED Vision Technologies Oscar F-810 User Manual
Page 52
Advertising
Camera interfaces
FireWire Hardware Installation Guide V8.0.0
52
Stingray data
The RS232 data interface has a typical output voltage from
4.2 V.
Stingray power
In accordance to IEEE 1394b specification the power supply (+8 V … +36 V)
should deliver a current of at least 1.5 A.
Note
If using daisy chain the camera has to supply further compo-
nents with also 1.5 A.
In such cases your power supply should be able to deliver 3.0 A.
Advertising
This manual is related to the following products: