Guppy output description, Guppy output block diagram – ALLIED Vision Technologies Oscar F-810 User Manual
Page 73
Advertising
Camera interfaces
FireWire Hardware Installation Guide V8.0.0
73
Guppy output description
Guppy output block diagram
(For board level see Chapter
Guppy (board level) IO block diagram
Figure 36: Guppy: output block diagram
Caution
Guppy
Max. 20 mA per output
OutVCC
Resistor value
5 V
1 k
5 mA load
recommended
Figure 37: Guppy: OutVCC and external resistor
Note
Guppy F-503:
IntEna is high, when all pixels are integrated simultaneously.
Using IntEna with electronic rolling shutter and global reset
release shutter: see Guppy Technical Manual, Chapter Trigger
modi.
external
internal
GPOut1
GPOutX
GND
GND
GND
GND
Advertising
This manual is related to the following products: