Multi-shot, On in chapter, Guppy f-038/044 also nir) – ALLIED Vision Technologies Guppy F-503 User Manual
Page 186: Exposure, Controlling image capture
Controlling image capture
GUPPY Technical Manual V7.1.0
186
Multi-shot
Setting multi-shot and entering a quantity of images in Count_Number in
the 61Ch register enables the camera to record a specified number of images.
The number is indicated in bits 16 to 31. If the camera is put into Iso_Enable
mode (see Chapter
on page 187), this flag is ignored
and deleted automatically once all the images have been recorded.
If multi-shot mode is activated and the images have not yet all been cap-
tured, it can be cancelled by resetting the flag. The same result can be
achieved by setting the number of images to 0.
Multi-shot can also be combined with the external trigger in order to grab a
certain number of images based on an external trigger.
Figure 104: Data flow and timing after end of exposure (Guppy F-038/044 also NIR)
One-shot command
C ExSync
Exposure
Integration start
Timebase reg.
X
shutter reg.
Offset
Processing delay
< 250
s
= 8
s
Guppy F-025: 42 µs
Guppy F-029: 42 µs
Guppy F-033
109µs
Guppy F-036: -21 µs
Guppy F-038: 42 µs
Guppy F-044: 42 µs
Guppy F-046: 22 µs
Guppy F-080: 34
µs
Guppy F-146: 20 µs
Guppy F-503: -42 µs
Tim
ebas
e
x Shu
tter + Offset
=
E
xpos
ure T
ime
First packet on bus
= 500
s
+/-62.5
s