ALLIED Vision Technologies Guppy F-503 - Manual (Page 51)

Specifications
GUPPY Technical Manual V7.1.0
51
Guppy F-503B/C
Feature Specification
Image device Type 1/2.5 (diag. 7.13 mm) Micron/Aptina CMOS MT9P031 with
microlens
• Electronic rolling shutter (ERS)
• Global reset release shutter (GRR)
Effective chip size 5.7 mm x 4.3 mm
Cell size 2.2 µm x 2.2 µm
Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back to filter distance: 9.5 mm
(see
Figure 29: Guppy C-Mount dimensions on page 71)
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical
flange back distance: 8 mm
(see
Figure 30: Guppy CS-Mount dimensions on page 72)
Picture size (max.) 2592 x 1944 pixels (Format_7 Mode_0)
ADC 12 bit
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps
variable frame rates in Format_7 up to 6.5 fps
Gain control Manual: 0-26 dB (average ~0.928 dB/step) for details see Chapter
Manual gain on page 122
Shutter speed 41.8 µs … ~2.3 s
External trigger shutter Trigger_Mode_0, trigger delay, IntEna delay
Look-up table One, user programmable (10 bit  8 bit); gamma (0.5)
Smart functions • AGC (auto gain control), LUT (look-up table), mirror (horizon-
tal and vertical), defect pixel correction, 2x - 4x binning (hori-
zontal: additive or average; vertical: average) or sub-sampling,
multi-shot, separate reference AOI for auto features
only color: AWB (auto white balance)
• one configurable input, three configurable outputs
• RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394a IIDC V1.3, single port
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE
Power consumption Less than 2 watt (@ 12 V DC)
Dimensions 48.2 mm x 30 mm x 30 mm (L x W x H); w/o tripod and lens
Mass 50 g (without lens)
Operating temperature + 5 °C ... + 45 °C housing temperature (without condensation)
Table 18: Specification Guppy F-503B/C