ALLIED Vision Technologies Guppy F-503 - Manual (Page 73)

Camera interfaces
GUPPY Technical Manual V7.1.0
73
Camera interfaces
This chapter gives you detailed information on status LEDs, inputs and out-
puts, trigger features and transmission of data packets.
IEEE 1394a port pin assignment
The IEEE 1394a plug is designed for industrial use and has the following pin
assignment as per specification:
Note

For a detailed description of the camera interfaces
(FireWire, I/O connector), ordering numbers and operat-
ing instructions see the Hardware Installation Guide.
Read all Notes and Cautions in the Hardware Installation
Guide, before using any interfaces.
Figure 31: IEEE 1394 connector
Note

Cables with latching connectors on one or both sides can be
used and are available with various lengths of 4.5 m or up to
17.5 m. Ask your local dealer for more details.
Pin Signal
1 Cable power
2 Cable GND
3 TPB-
4 TPB+
5 TPA-
6 TPA+