DE DIETRICH ELITEC DTG 130 Eco.Nox - Manual (Page 19)

19
01/02/11 - 300002915-001-E DTG 130 Eco.NOx
4.3.4 Assembling the appliance
Boiler delivered assembled (without control panel)
Take out the shutter + screen assembly
Slide the panel along the front plate.
Push the 1 tubes through the lower opening on the panel case.
Ensure that the centring pins 3 fall into the slots 4.
5. Contact spring
6. Bulbs
 Place the bulbs in the sensor tube in front of the boiler. Push
them into the funnel until it butts against it.
 2 bulbs (A): Use the contact spring
3 bulbs (B): The contact spring is not used
8518N010B
A B