eLine Technology SNI-CamSetup User Manual

Page 11

Advertising
background image

1. Network type: specify the IP address.

11

Manual port mapping, you can not enable automatic port mapping must manually configure the application port and
mobile phone viewing port, and then do port mapping application port on the router web and client viewing port, mobile
phone viewing port is mobile from here.with the port. Set the camera port, the camera will automatically set the camera
port, take a sequential three-port is automatically set.

2.

Network Type: Obtain an IP address automatically (DHCP)

1. IP address:Input an unused IP address in LAN.

2. Mask:The same as the PC in LAN.

3. Gateway:The same as the PC in LAN

4. Preferred DNS:Please use the DNS address

provided by ISP, it should be the same as the PC in

LAN.

5. Alternate DNS:Option. Used when the preferred

DNS is down.

6. After setting, press “Save”. IP cam will connect to

internet based on the setting.

eLine Sniper Camera Setup Manual

eLineTechnology.com

10

Advertising