eLine Technology SNI-CamSetup - Manual (Page 9)

<3.2> Allowed to enter the IP address directly access the camera
8
<4> Network Settings
<4.1>
Wired cameras
If the network camera only in the LAN, without special network settings, "plug and play". In the LAN Setup software can watch or set
all online network cameras. NVR2008 software can watch in the LAN network cameras or video online.
For remote monitoring of the Internet, in monitoring the end user using the Viewer software to view or set, must be set to the network it
can connect to the Internet (Internet). Network camera does not have a public IP, can still be used, but must set the registration server
(dServer) registered account, log in to view account and password.
Network cameras can be connected to different network environments on the network, the user should be in accordance with the needs
of the network environment, complete the network parameter settings.
Network settings in two ways:
(1) Auto Setup: Auto Get IP automatically mapped to application port and mobile phone viewing port (requires the user to
be opened in the router the UPNP functions, such as TP-LINK UPNP settings: upnp settings in the router settings page,
select the forwarding rules,upnp current state of the Close, then click the "open" button to open the uPnP function;
clicking the "port test" button, can the detailed test applications port and mobile phone viewing port by)
1. Automatically obtain an IP address successfully (in front of the icon turns green)
2. Port mapping on the router (in front of the icon turns green)
3. Normally connect to the server (in front of the icon turns green)
4. Connection time server successfully (in front of the icon turns green)
Allow enter the IP address directly access the camera:
The default state is open, you can directly enter the IP
address by viewing the camera on the Viewer. Turn off this
feature, you can not directly enter the IP address in the
Viewer to watch this camera.
eLine Sniper Camera Setup Manual eLineTechnology.com
8