eLine Technology SNI-CamSetup - Manual (Page 4)

If you only use the LAN, you do not need to do special network settings, is a "plug and play" hardware.
As used in the Internet (Internet), refer to <4> Set network. Average user network environment has the following
two. Any special requirements, please contact network technology service providers.
<1.1> Network Camera is directly connected to the public domain.
First network camera used pairs of wiring is connected to on the computer. In accordance with to the broadband the
the requirements of of the suppliers (ISP), in the SETUP lieutenant general its set to DHCP to automatically to obtain the
the IP, PPPoE dial-up Internet access or Public IP the public network IP (Reference <4> set up the network).
After setting, refer to the diagram wiring network.
Map 1
<1.2>
Network cameras connected to the local area network (LAN).
Network cameras connected to the local area network (LAN).
This equipment can be installed directly in the LAN does not require an external IP.
eLine Sniper Camera Setup Manual eLineTechnology.com
3