eLine Technology SNI-CamSetup - Manual (Page 34)

35
图 36
37
Recording schedules settings:
Recording schedules:
daily timetable: If you want 24 hours a day to monitor select this option.
Points need to customize the recording time per day.
Weekly timetable: points following changes to the weekly schedule. Select
a date to be monitored.
Monthly timetable: points under the changes to monthly plans. Select
monitoring since January.
Define Recording Hours:
Normal Recording: select normal video, use the mouse to select the
required recording time period, the time period is selected will turn green.
Event recording: event recording is selected, select the desired video
motion region, then the mouse to select the required recording time period is
selected period of time depending on the selected area display different
depths of the blue.
To deselect the recording time period, you can select the event recording and
do not select any motion region, and then the mouse to select the time period
you need to cancel.
After the completion of the scheduled recording settings, click "OK" to
complete.
Motion detection settings (locale):
Point of each line in three areas key to enter the area to be set.
Then set marked with different colors in the image above a different
dynamic detection area. You can set up three.
Enable motion detection area, you need to check the area will be
enabled.
Thresh: the threshold value is smaller, the more sensitive the motion
detection.
Sens: Set the sensitivity to rule out interference from other moving
objects. The appropriate sensitivity will help to capture to monitor the
target.
General set threshold value of 15, sensitivity 95.
Click OK to save the settings.
eLine Sniper Camera Setup Manual eLineTechnology.com
33