eLine Technology SNI-CamSetup - Manual (Page 8)

<3>
System Tools
6
<3.1> Mode is set
7
Click "System Tools" to switch to the system settings
interface.
A. Update the password: Set or change the camcorder
password.
1) (such as setting up the hardware password, all users are
required to enter the correct password to view it)
II. Restart the camera: Restart the camera.
III. Address and baud rate: Set the address and baud rate.
IV. Phone image quality: set the phone to see the image
quality.
V. Streaming media encoder options: set to use RTSP /
RTP / RTCP protocol access to the camera stream encoding
type.
VI. Operating mode: <3.1> said.
VII. Camera Name: You can enter at any time to change
the name.
1) Click on the pencil icon to make changes.
VIII. Mobile phone watch requires authentication: Check
this phone to view this camera need to authenticate.
IX. At the top of the video display time: Select this time
will be displayed at the top of the video. Show time is a
part of the video can not be deleted. The user can update
the time format.
Click "System Tools" to switch to the system settings interface.
Distinguish between different modes in order to avoid the conflict
and distress of the user in the actual operation. Although a step some
trouble, but to protect the integrity of the individual functions in
practical applications. Each one of the working modes have different
features, in order to adapt to different environments.
Do not connect to the server: If the user has a fixed IP or network
(LAN), including use, you can not connect to the server.
Connect to the server: (1) The user does not have a fixed IP, and
must select Internet mode from the remote viewer to watch the
real-time image;
(2) user needs DVR NVR remote camera video storage, and the need
to use local time, select the NVR mode.
eLine Sniper Camera Setup Manual eLineTechnology.com
7