eLine Technology SNI-CamSetup - Manual (Page 37)

41
42
Config NAS
Enabled NAS: select this option will be based on pre-set conditions
video. (Enable Success icon is displayed in red, otherwise grayed out)
Audio included: selected audio input source video input.
Normal recording: no trigger mechanism based on pre-set video.
Event recording: the user can pre-set trigger conditions to trigger
recording.
The trigger condition is a regional one, two, three linkage trigger, and
the DI input trigger. Storage Policy:
Overwrite: the the early video files are automatically deleted when the
NAS space is full to free up space for a new video.
Stop when full: Do not remove the earlier video, stop recording
automatically after the NAS space is full.
enable schedule: see <9.1> scheduled recording part
Motion detection: Refer to <9.1>
Video quality: see <9.1> Video quality part
Path and acct: see below
Save: Click Save to save the settings.
Note: remote web playback available NAS recording, operations, see
<12> Remote Playback
Storage limit (M): Set the maximum value of NAS
storage
IP: NAS's IP address
Path: NAS on the save path
Account: Username save the video file folder
Password: save the video folder password
Confirm: Password confirmation
Select common video, real-time video directly on a NAS
device.
Select event recording, the premise must be enabled in
the motion detection motion detection and set the
detection area, the video will be recorded when motion is
detected on a NAS device.
eLine Sniper Camera Setup Manual eLineTechnology.com
36