FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 23)

2002-12-11 23
8 Feed the chain out through the drive wheel by
turning the drive shaft until the chain is loose.
CAUTION! Make sure that the short loose end
of the chain runs smoothly through the plastic
guides. Risk for the plastic guides to brake.
9 Pull out the chain from below the idler end unit.
10 Unpack the new chain. Note that the chain can
only be mounted in its direction of travel
(marked with an arrow).
11 Insert the chain from below, with the nose for-
ward (see previous step).
CAUTION! Make sure that you start feeding the
chain from the idler end unit towards the drive
unit or it might lead to chain damage.
Direction of travel