FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 37)

2002-12-11 37
6 Carefully pull the chain out.
CAUTION! Make sure that the chain runs
smoothly through the drive end. Risk for the
chain to brake.
7 Note that the chain can be mounted one way
only, even if it is bidirectional. The chain shall
always be mounted in the direction according to
the picture, on top of the beam from the idler end
to the drive end.
8 Feed the chain to the drive end and if necessary
help feeding it by pulling the other chain. If the
other chain is removed turn the drive wheel.
9 Fit the wheel.
Mou
nting
dire
ction