FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 34)

2002-12-11 34
4 Adjust the keyway on the shaft so it fits the key-
way of the motor gearbox.
Make sure the key is correctly fitted in keyway.
5 Mount the motor on to the short shaft. The
torque arm should be placed on the rubber tube.
CAUTION! Make sure that the torque arm fork
has entered the cage in a correct way. An
unlocked rotating motor can cause personal
injury.
6 Insert the long shaft through the inner side plate
(furthest away from the motor). Place the retain-
ing ring on the shaft and connect the shaft and
the motor.
Mount the outer side plate. Fit the screws
(2×M8) on the side plate, tighten with the 5 mm
Allen key.