FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 51)

2002-12-11 51
Replace driving belt on XT transfer unit XTPT M1
Introduction
Valid for XT transfer unit type M1.
Tools
Instruction
Phillips screwdriver
Allen key
3 mm
Allen key 5 mm
Box wrench 10 mm
1 Remove the screws (8x) on the transfer unit
covers on both sides. Use the Phillips
screwdriver. Remove the covers.
2 Loosen the screws holding the transfer unit
cover, use the 3 mm Allen key. Remove the
transfer unit cover.