FlexLink XT (макс. 30 кг) Тех. обслуживание - Manual (Page 24)

2002-12-11 24
12 Feed the chain via the idler end into the con-
veyor.
13 Feed the chain into the conveyor until it reaches
the drive wheel at the drive end.
Repeat steps 12 and 13 for the second chain.
14 Feed the chains to the drive wheel and turn the
drive shaft until the chains are hanging a bit
below the conveyor.
CAUTION! Make sure that the chains enter the
drive wheel correctly. Risk for the plastic guides
to brake.
15 Use a pair of slip joint pliers to insert the pin half-
way into the chain link.