Burkert Type 8640 - Manual (Page 85)

85
FieldbusmodulesPROFINETIO,
EtherNet/IPandMODBUSTCP
15.6.3. Device configuration
You need to log in to change the device name or IP address.
→
Enter your user name and password. User name: admin
Password: admin
Figure 58: Entering login user name and password.
Figure 59: Once you have logged in you can adjust the parameters.
The device name assigned here will be used later in project planning (e.g. under STEP 7).
→
Reset the power to the EtherNet slave. This applies the changed parameters.
english
Type 8640