I-series panels, 3 after installing the eclipse hx system, 1 configuring the system with ehx software – Clear-Com HX System Frames User Manual

Page 15: After installing the eclipse hx system, Configuring the system with ehx software

Advertising
background image


I-Series panels

I-Series panels have internal power supplies, with removable AC power cords. The power
supplies are universal, operating over a voltage range of 90 - 245 VAC and 50 - 60 Hz. The
maximum dissipation is 40 W.

Note:

Each panel must be plugged into an AC source at its location.


Only connect power supply to earthed supply sockets. Ensure that the power
supply is routed to avoid sharp bends, hot surfaces, pinches and abrasion.
Refer all servicing to qualified service personnel.

For more safety guidance, see the Safety Instructions supplied with this
product.

3.3 After installing the Eclipse HX system

3.3.1 Configuring the system with EHX software

The Eclipse HX (EHX) configuration software controls the operation of the connected audio
devices by sending signals to the CPU and interface cards in the matrix frame, which then
relay the signals to connected audio devices and systems.

Configurations (the operating parameters of complete system setups) are created in EHX.

Up to four complete system configurations can be stored in the CPU card of the Eclipse HX-
Median, Eclipse HX-Omega, Eclipse HX-Delta or the CPU of the HX-PiCO. These
configurations can be retrieved and activated on the matrix frame when required.

The external PC that hosts the EHX software can store an almost unlimited number of
complete system configurations (the number is only limited by the available memory space
on the PC). You can download the configurations to the matrix frame as required.

When running EHX on Windows operating systems, the client and server can run on
separate machines connected over a network. You can use EHX to perform a wide range of
configuration tasks, including:

• Assigning labels (names) to ports and user panels.

• Creating point-to-point and fixed group (partyline) communications between

connected audio devices.

• Enabling, limiting or disabling features of any connected user panel or card.

• Configuring connections between matrix frames .

Tip:

The above list is not definitive. For more information about the capabilities of EHX, see

EHX Help.

15

Eclipse HX Matrix Frame Installation Guide

Advertising
This manual is related to the following products: