Checking the matrix frame – Clear-Com HX System Frames User Manual

Page 18

Advertising
background image


Checking the matrix frame

Eclipse HX-Omega, HX-Median and HX-Delta

The LEDs on the front of the CPU card indicate its operational status:

Figure 2: CPU card LEDs

RESET

+5V

+3.3V

OK

IPC

MASTER

LAN A

LAN B

IN SYNC

SI

CONFIG

ENG

RESET

The two power supplies are
lit green to indicate that they
are working.

Dot matrix display indicates
which of the four stored
configurations is currently
operational. The configuration
number displays for a short
time after power up (2s) or
when the configuration is
selected.

OK LED flashes green
(1:1 1Hz) to indicate that the
CPU software is working.

Master LED is lit green on
whichever CPU card is
currently serving as master.

IPC (Interprocessor
communication) LED
is lit
green to indicate that the two
CPU cards (primary and
backup) are exchanging
information.

LAN LEDs (A and B) are lit
green to indicate connection
with LAN port(s).

When multiple Eclipse HX
matrices are connected
together, the IN SYNC LED is
lit to indicate that the matrices
are connected and
synchronized.

SI LED flashes green (1:1 1Hz)
to indicate communications
activity.

18

Eclipse HX Matrix Frame Installation Guide

Advertising
This manual is related to the following products: