Clear-Com HX System Frames - Manual (Page 73)

The matrix is connected to an Ethernet network with the RJ-45 sockets labeled:
• LAN 1 and LAN 2 on the rear of the Eclipse HX-Omega, Eclipse HX-Median or
Eclipse HX-Delta.
• The RJ-45 socket labeled LAN on the rear of the Eclipse HX-PiCo.
Note:
Also applies to the E-32 matrix, the immediate predecessor of the Eclipse HX-PiCo.
The connectors have standard Ethernet pin assignments (see
Figure 31: LAN 1 and LAN 2 Ethernet connectors and Table 20: LAN 1 and LAN2
Ethernet connectors pinout).
Figure 30: Dedicated serial port audio trunk wiring
Figure 31: LAN 1 and LAN 2 Ethernet connectors
73 Eclipse HX Matrix Frame Installation Guide