Clear-Com V12PDDXY - Manual (Page 114)

During phase 1 of the panel connection process, only progress messages will be displayed
without status codes.
If an error occurs then one of the following status messages is displayed:
Error / status message Description / comments
Network not connected
LAN cable not inserted. If DHCP mode selected, a
DHCP server was not found.
IVC Server not found
The login server is inaccessible or not running.
Login USER xyz denied
The login server could not find an online IVC to log the
panel into.
Table 27: CONNECT menu: phase 1 status / error messages
The second connection phase begins with the panel identifying itself to the host matrix.
During this phase, error and status messages are displayed with status codes and sub-
codes.
Code Error / status message Description / comments
Err 1:0 Check User ID The name or password supplied were invalid.
Err 4:0 Media busy The system is busy and will try again shortly.
Info 3:0 Connecting... OK, connecting to the IVC.
Info 5:0 Reconnecting OK (the call is being made again with new codec
settings).
Err 8:0 Connection lost The IVC connection was lost.
Table 28: CONNECT menu: phase 2 status / error messages
114 V-Series Panels User Guide