Clear-Com V12PDDXY - Manual (Page 32)

two-way radios.
Unlatched talk keys and listen keys are not
activated.
Table 7: Headset PTT options
4.13 Status LEDs (Tallies)
Status LEDs (tallies) indicate the status of a key, audio route, or menu option.
Note:
In the case of lever key panels, the status LEDs are set under the display windows. In
pushbutton panels, the push buttons themselves act as status indicators, and there are no
separate LEDs. In rotary panels, the rotary controls and the talk buttons act as status
indicators.
The status LEDs (tallies) signal the following:
LED action / state Description / comments
Solid red A talk path (audio route) is active.
Solid green A listen path (audio route) is active.
Solid amber A talk and listen path (audio route) is active.
LED is off
Key is either not configured or the menu option is not
selectable.
LED flashing
Either user action is required, or there is an incoming call or
call signal.
LED is dim red Key is configured as a talk key or a menu option is
selectable.
LED is dim green
Key is configured as a listen key or menu option is selectable
LED is dim amber
Key is configured as a talk and listen key or menu option is
selectable.
LED is blue
Menu mode is active.
Table 8: LED actions / states
Important note:
Specific information on the operation / action of status LEDs (tallies) is provided by sections
describing specific functionality and / or menu operations.
32 V-Series Panels User Guide