Clear-Com V12PDDXY - Manual (Page 134)

4. Use the two fixing screws to attach the lower wall bracket to the rear of the desktop
panel so that the offset part of the plate faces away from the panel body.
Desktop with Lower Bracket Fitted
Figure 163: Desktop casing (with lower bracket attached)
5. Hang the panel on the upper wall bracket and mark the position of the screw hole for
the lower bracket on the wall. Remove the panel and place a suitable fixing for the
lower wall bracket.
6. Replace the panel on the upper bracket and attach the lower wall bracket to the
fixing. Attach the cables to the connectors and power the panel up.
134 V-Series Panels User Guide