Clear-Com V12PDDXY - Manual (Page 28)

4.4 Menu
V-Series panel functions are configured in Menu mode. You enter Menu mode by pressing
and releasing the Menu button.
When the panel enters Menu mode, the display windows are cleared of labels and the panel
menus are displayed. The
blue menu LED is lit.
To exit an active menu, press the Menu button again.
Note:
Access to some panel menus can be disabled in ECS (Eclipse Configuration Software) /
EHX (Eclipse HX configuration software) through Advanced Settings > Menu Options in
Cards and Ports. A PIN code (set in the configuration software) must be entered to disable
access to these menus. When the PIN code is entered on the panel, access is granted. For
more information, see your ECS / EHX documentation.
4.5 LS Main levels (volume) control
The main levels (volume) control comprises a rotary encoder with push-switch action and
a tri-color loudspeaker volume indicator LED.
The LED volume indications are:
•
Red - high volume.
•
Amber - intermediate volume.
•
Green - low volume.
Turn the volume control clockwise to increase the loudspeaker volume and anticlockwise to
decrease loudspeaker volume.
The loudspeaker cut indicator LED is lit
red when the loudspeaker output is muted. Press
the volume control to toggle the loudspeaker cut.
4.6 Auxiliary levels (volume) control
The auxiliary panel levels (volume) control comprises a rotary encoder with push-switch
action and a tri-color loudspeaker volume indicator LED. The LED volume indications are:
•
Red - high volume.
•
Amber - intermediate volume.
•
Green - low volume.
The auxiliary levels (volume) control sets the volume on the optional external loudspeaker
that you can connect to the auxiliary audio port on the rear of the panel. Turn the volume
control clockwise to increase the loudspeaker volume and anticlockwise to decrease
loudspeaker volume.
Press and release the auxiliary volume control to play back messages stored on the
Listen Again system (see next section).
28 V-Series Panels User Guide