Clear-Com V12PDDXY - Manual (Page 76)

5.6.5 ATTRIBUTES menu
The LOCAL PNL > ATTRIBUTES menu enables you to set the attributes of a panel key to
TALK, LISTEN, TALK + LSTN, TALK + FL or DUAL T+L.
Attribute Description / comments
TALK Sets a talk from this panel to a destination with no automatic listen to
the destination.
LISTEN Sets a key to listen to the source without talking to the destination at
the same time. Use as a monitor key. Use the volume level up/down
buttons under the display (lever key and pushbutton panels) or rotary
control to increase listen level.
TALK + LSTN Sets a talk key with listen. Use the volume level up/down buttons
under the display (lever key and pushbutton panel) or rotary encoder to
increase or mute the listen level.
TALK + FL Sets a talk key with permanently made listen. Use the volume level
up/down buttons under the display (lever key and pushbutton panels)
or rotary encoder to increase or mute the listen level.
DUAL T + L
Sets a dual talk and listen key (used only on pushbutton panel types).
Press and hold to activate a talk and listen, or press and release(less
than 200ms) to latch a listen on the same pushbutton.
Table 16:Available attributes in ATTRIBUTES menu
Tip: To return to the SYS CONFIG menu, press the Reply key / Reply key talk button
(ATTRIBUTES).
76 V-Series Panels User Guide