Hach-Lange TSS PORTABLE Handheld Instrument for Turbidity_Suspended Solids Manual - Manual (Page 11)

Figure 2 Inserting the rechargeable batteries
WA R N I N G
11
Installation
3.2.2 Install the charger
1. Push the slide switch (item 2 , Figure 3 ) on the back of the charger up and remove the
adapter (item 3 , Figure 3 ).
2. Fix the required adapter to the charger, until it audibly locks into place.
3. Insert the charging plug (item 3 , Figure 4 ) into the charging socket (item 4 , Figure 4 )
of the instrument.
4. Connect the power (100–240 V~/50–60 Hz).
1 Catch 4 Battery holder
2 Battery compartment 5 rechargeable Batteries
3 Battery clip 6 Cap
Risk of fire and explosion.
Only use the battery charger LZY607 to charge the rechargeable NiMH batteries.