Hach-Lange TSS PORTABLE Handheld Instrument for Turbidity_Suspended Solids Manual - Manual (Page 17)

17
Start Up
4.2.2.1 Querying internal information
Information about the probe and instrument can be queried directly from the main menu
using the navigation keys UP/DOWN .
The following information is displayed:
a. Measurement value (homogeneity in %)
b. Battery charge level
c. Diagnosis parameters, such as:
• Probe serial number (instrument information)
• Probe software version (instrument information)
• Probe number Start XX (probe diagnosis data)
• DATA rem. cap. XXX (Remaining capacity of the measurement points)
• Fault no. XX
• Serial no. XXXXX (instrument designation)
• Software version XXXXX (instrument designation)
4.3 Select language
The instrument supports the languages German and English. The instrument functions in
the selected language until the option is changed.
1. Select MENU , confirm with ENTER/ON .
2. Select SPRACHE/LANGUAGE and confirm with ENTER/ON .
3. Select DEUT./GERMAN. for German or ENGL./ENGLISH for English and confirm with
ENTER/ON .
4. Press CLEAR/OFF to return to the main menu.
4.4 Setting the date and time
Set the time and date display:
1. Select MENU , confirm with ENTER/ON .
2. Select TIME/DATE , confirm with ENTER/ON .
3. Select YEAR , MONTH , DAY , HOUR , MINUTE or SECOND , confirm with ENTER/ON .
4. Change the displayed values with the navigation keys.
5. Confirm each setting with ENTER/ON .
6. Press CLEAR/OFF to return to the MENU .
Note: Press CLEAR/OFF again to return to the main menu.