3 charging the rechargeable batteries, Figure 3 – Hach-Lange TSS PORTABLE Handheld Instrument for Turbidity_Suspended Solids Manual User Manual

Page 12

Advertising
background image

Figure 3

Replacing the adapter

12

Installation

3.2.3

Charging the rechargeable batteries

Note: The instrument must be switched off while charging so that the rechargeable batteries can be
charged.

Note: When using the instrument for the first time, charge for at least three hours. The rechargeable
batteries are fully charged when the LED on the charger is green.

1. Connect the charger to the power supply source and then connect to the instrument

(

Figure 4

). The rechargeable batteries are charged.

2. Once the rechargeable batteries are fully charged, disconnect the instrument from

the charger.

1

Charger

3

Removing the adapter

2

Slide switch

Advertising