DoorKing 1833 PC Programmable - Manual (Page 31)

1835-065-E-7-13 29
No factory setting
0 (10 area codes)
0 (OFF)
007 (7 sec)
1 (tone ON)
0 (9600 Baud)
0 (activates relay)
1 (Turned ON)
Single system
Master Code
Number of Area Codes Allowed
Call-Up Operation, Interfacing with DKS 1816 or 1820 Systems Only
Resident Elevator Button Relay Time
Open Tone ON or OFF
RS-232 Speed Setting
Switch Input Feature
Elevator Control Feature
Single or Multiple Systems
Section 3.2 Setup Entry System for PC Programming
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.2.9 26
27
27
27
27
28
28
28
28
* 6 0
* 78
* 36
* 15
* 85
* 18
* 75
* 04
Page # Factory Setting Overview for System Keypad Programming Section Command
Master
Switch ON
No factory setting
Factory message
Factory message
Factory message
Factory message
Programming Letters and Numbers from Keypad
Programming the User Message - 1834, 1835 Systems
Programming the Instruction Message - 1834, 1835 Systems
Programming the User Message - 1837 Systems
Programming the Instruction Message - 1837 Systems
Section 3.4 Programming Letters, Numbers and Messages
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5 33
34
35
36
37 None
* 80
* 81
* 80
* 81
No factory setting
No factory setting
No factory setting
No factory setting Programming Five-Digit Device Codes
Delete Device Codes
Enabling Facility Codes
Programming Facility Codes
Section 3.6 Programming Device Codes - 1833, 1835, 1837 Only
3.6.1
3.6.2
3.6.3
3.6.4 43
43
43
43 * 70
* 71
* 72
* 73
No factory setting
No factory setting
No factory setting
No factory setting Programming the Anti-Pass Back Mode
Re-Sync All Devices
Re-Sync Individual Devices
Reset Facility Counter
Section 3.8 Anti-Pass Back
3.8.1
3.8.2
3.8.3
3.8.4 45
45
45
45 * 43
* 45
* 46
* 48
No factory setting
No factory setting
No factory setting Programming Five-Digit Device Codes
Delete Device Codes
Enabling Facility Codes
Section 3.7 Programming Four-Digit Entry Codes
3.7.1
3.7.2
3.7.3 44
44
44 * 02
* 02
* 12
Three (3) digits
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No Factory setting
No factory setting
1 (Pause ON)
Programming the Directory Code Length
Programming Directory Code AND 7-Digit Phone Numbers - No Area Code
Programming Area Codes
Programming Phone Numbers that need Area Codes
Programming Names - 1834, 1835, 1837 Systems Only
Deleting Individual Phone Numbers
Delete Names - 1834, 1835, 1837 Systems Only
Delete Area Codes
Display Phone Numbers - 1834, 1835, 1837 Systems Only
PBX Line Access Code Programming
Touch-Tone Dialing Pause
Section 3.5 Programming Phone Numbers and Names
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
3.5.6
3.5.7
3.5.8
3.5.9
3.5.10
3.5.11 39
39
40
40
41
41
41
42
42
42
42 * 20
* 01
* 24
* 41
* 66
* 01
* 65
* 24
* 06
* 09
* 27
060 (60 sec)
010 (relay 1 activates)
Touch-tone
010 (relay 1 activates)
Relay Strike Time
Talk Time
Tone Open Numbers
Switch Input Relay(s) Activation
Touch-tone / Rotary-dial
Rotary Dial-9 Relay(s) Activation
Section 3.3 General Programming using System Keypad
3.3.1
3.3.2
3.3.3
30
30
31
Relay 0: 01 (1 sec)
Relay 1: 01 (1 sec)
Relay 2: 01 (1 sec)
Relay 0: # # # #
Relay 1: 9 8 7 6
Relay 2: 5 4 3 2
* 03
* 08
* 05
3.3.4
3.3.5
3.3.6 31
32
32
* 50
* 07
* 51