DoorKing 1833 PC Programmable - Manual (Page 59)

1835-065-E-7-13 57
Surface Mount Recess Kit
Use to recess a surface mount unit into a wall or column. P/N 1803-150.
Flush Mount Kit
Use to install flush style units into a wall or column. Kit includes rough-in back box and trim-ring. P/N 1814-165 comes with
stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
Flush Mount Surface Mounting Kit
Use to surface mount a flush style unit. P/N 1814-152.
Stainless Steel Case
Replaces the black steel surface mount case with a stainless steel case. P/N 1810-102.
Surge Suppressors
Phone line suppressor. P/N 1878-010.
Low voltage (28 V) suppressor. P/N 1878-010.
High voltage (115 V) suppressor. P/N 1879-080.
Mounting Posts
Heavy-duty goose-neck mounting post with mounting plate. P/N 1200-038.
Heavy-duty goose-neck mounting post with concrete base plate for pad mounting. P/N 1200-037.
Designer Style mounting posts; offset P/N 1200-086, straight P/N 1200-085.
Mounting Kiosk, for flush mount units only; P/N 1200-170.
Expansion Board
Expansion boards (P/N 2351-010) allow the 1833, 1835 and 1837 system to operate up to sixteen individual doors or gates,
provides door ajar and forced entry alarms, and can activate local and building alarm systems. Also allows DoorKing gate
operators to report gate operator data and activity to the entry system.
Elevator Board
Elevator control boards (P/N 2348-010) provide control of up to four elevators, with each elevator having a maximum of 64
floors.
RS-232 Cable
RS-232 cable with DB-9 connector on one end and wires on the other end. Use this cable to program the entry system from a
PC using RS-232 communications instead of the modem. P/N 1818-040.
TCP/IP Converter Kit
Enables the 1830 series system to send and receive data via the DKS Internet Server or a LAN. P/N 1830-175.
RS-422 Adapter Kit
Enables the 1830 series system to send and receive data to a PC. P/N 1840-055.
Wireless Adapter
Enables the 1830 series system to send and receive only data (no voice communication) to a PC without a cable connection.
P/N 1815-510 - 1 Remote, 1815-511 - 2 Remotes, 1815-512 - 3 Remotes.
Yagi High-Gain Antenna
Use with the wireless adapter to send and receive data much farther to a PC than the wireless adapter’s antenna. P/N 1815-741.
Telephone Test Set
Includes clips, cord and carrying case. P/N 1800-050.
Battery
12 volt .8 amp hour gel cell provides stand by power during power interruptions. P/N 1801-008.
6.2 Accessories