Impulse 463E - Manual (Page 70)

© Sealevel Systems, Inc. - 67 - SeaI/O User Manual
Write
CSeaMaxW32::Write( slave_address_t slaveID, seaio_type_t type, address_loc_t
starting_address, address_range_t range, unsigned char*
data)
Description Write performs a Modbus write on an opened SeaIO module and
returns the data by reference.
The actual Modbus write type is specified by the ‘type’ argument.
Since Modbus is actually base one, the starting location should be
no less than one. Likewise, the range indicates how many
consecutive inputs should be read.
The final parameter, ‘data’, is a pointer to a buffer in which to
store the returned data – specifically, an array of bytes. Consult
the provided code examples for model specific information.
Parameters slave_address_t slave_id
seaio_type_t type
address_loc_t starting_address
address_range_t range
unsigned char* data
Return Codes -14 EFAULT A Modbus read exception has occurred – the
first byte of the data buffer contains the
exception code.
-22 EINVAL A NULL pointer has been supplied where a
pointer to a data buffer was expected.
-9 EBADF The specified communication is not currently
established.
-18 EXDEV Can not write data to the outbound
connection – connection error.
-19 ENODEV The SeaIO module did not respond.
-34 ERANGE Attempting to write to more IO points than
are available.
-27 EFBIG Illegal data value
≥ 0 Success – The number of valid data bytes in
the buffer.