Appendix a – data encoding tables – Impulse 463E User Manual
Page 98
© Sealevel Systems, Inc.
- 95 -
SeaI/O User Manual
Appendix A – Data Encoding Tables
These tables help to decode Get Config responses from Sealevel SeaI/O modules. A
Get Config response contains five bytes in the following order:
Model
Number Baud
Rate Bridge
Type Parity Magic
Cookie
For more information, refer to the Get Config request explained in the Extended
Modbus Command Set section of this manual.
NOTE:
A ‘Get’ request (0x45) resulting in (00) means that a ‘Get
Extended Module Information’ (0x66) request should be
performed to retrieve the actual device number.
Refer to the Extended Modbus Command section of this manual
for additional information.
Baud Rates
Result
Baud Rate
01 1200
02 2400
03 4800
04 9600
05 14.4K
06 19.2K
07 28.8K
08 38.4K
09 57.6K
0A 115.2K
Model Numbers
Result Model
9A 410x
A4 420x
AE 430x
B8 440x
C2 450x
CE 462x
CF 463x
D6 470x
00
See Note
Bridge Types
Result Bridge
00 RS-485
01 Ethernet
02 USB
03 RS-232
04 Expansion
Unit
Parity
Result
Parity
00 None
01 Odd
02 Even