Impulse 463E User Manual
Page 72
© Sealevel Systems, Inc.
- 69 -
SeaI/O User Manual
set_intermessage_delay
CSeaMaxW32::set_intermessage_delay( int delay)
Description
This function is used to set the intermessage delay time in effort to
optimize the number of messages that can be sent. This time must
be at least 4 character times long. The default is a function of the
baud rate and should not be changed unless necessary.
The parameter ‘delay’ is the delay (in milliseconds) to wait
between sending back to back messages.
Parameters
int delay
Return Codes
≥ 0 Success – A Windows HANDLE to the COM resource.
getCommHandle
CSeaMaxW32::getCommHandle( void )
Description
This method may be used to return the HANDLE type data used by
SeaMAX as the communications resource.
Parameters
None
Return Codes
None