Liquid Controls SP4000 - Manual (Page 50)

47
SP4000 Flow Computer
Select the unit for volumetric flowrate.
Note:
The unit selected here also applies to the following:
• Zero and full scale value for current
• Relay setpoints
Selection:
The available selections will change depending on the flow equation
selected.
bbl/time base, gal/time base, l/time base, hl/time base, dm 3 /
time base, ft 3 /time base, m 3 /time base, acf/time base, igal/
time base
All units listed above apply to the actual volume measured under
operating conditions.
Display: ft3/h
VOLUME FLOW UNIT
Select the unit for uncorrected volume totalizer.
Note:
The unit selected here also applies to the following:
• Pulse value for pulse output
• Relay setpoints
Selection:
The available selections will change depending on the flow equation
selected.
bbl, gal, l, hl, dm 3 , ft 3 , m 3 , acf, igal
All units listed above apply to the actual volume measured under
operating conditions.
Display: ft3
VOLUME TOTAL UNIT
VOLUME FLOW UNIT
VOLUME TOTAL UNIT
SYSTEM UNITS
6.6
SYSTEM
UNITS
(Continued)