Liquid Controls SP4000 - Manual (Page 88)

85
SP4000 Flow Computer
COMMUNICATION
6.13
COMMUNICATION
(Continued)
Enter the Number Of Redials desired in the event of a busy signal or
communication problem.
Input:
max. 2 digit number
Display: 3
NUMBER OF REDIALS
NUMBER OF REDIALS
(Modem or Pager)
2
RATE 1
TOTAL
Select YES or NO for Call On Error prompt.
Selection:
YES - Unit will call out to remote PC if a designated CSI
error occurs.
NO - Unit will not call out to remote PC if error occurs.
Display: YES
CALL ON ERROR
CALL ON ERROR
(Modem or Pager)
2
RATE 1
TOTAL
2
RATE 1
TOTAL
Select YES or NO for Modem Auto Answer
Selection:
YES - Modem will answer incoming calls.
NO - Modem will not answer incoming calls.
Display: YES
MODEM AUTO ANSWER
Define a Call Out Number. Enter the telephone number, pager
number or email address to be called.
Input:
max. 16 digit phone number
Display: ### ### ### ### ####
CALL OUT NO
Define the Call Out Time. Enter scheduled call out time (24 hr format),
if you want the unit to call out to a remote PC.
Input:
Time of day in hours & minutes (HH:MM).
Display: 00:00
CALL OUT TIME
MODEM AUTO
ANSWER
(Modem)
CALL OUT NO
(Modem or Pager)
CALL OUT TIME
(Modem or Pager)